Products >> EDGE BANDING MACHINE >> 

  • Automatic edge banding machine
Automatic edge banding machine

Automatic edge banding machine

  • Product No.:E-F568JC
  • Model:E-F568JC
  • Electrical Lift:Yes
  • Motor Power:22KW
  • Place of Origin:China
  • Work speed:23m/min
  • Dimension:>60mm
  • Online Inquiry
 



Product Introduction:

E-F568JC is a fully automatic  high-speed edge banding machine, the highest speed can reach 23m/min. This model has complete functions, stable and powerful system, intelligent operation control and high-speed and efficient production, suitable for mass production of panel furniture. Using high-quality materials and brand configuration, it can adapt to high and low temperature climate and other harsh environments for production operations, with stable production, maintenance-saving, durability and other characteristics.Product Application:

Edge banding machine in woodworking is used in banding edge of desks,cabinet,wardrobe and straight line furniture.The edge bander can be PVC,melamine,wood based works and so on,with powerful functions as edge feeding,sticking,material cutting,front-back trimming,roughing,fine finishing,scraping and buffing,with features as follows:
1) Adopt high-power and high frequency motor to improve effect
2)The pressure beam is made of high strength aluminum alloy heavy structure, which makes the material more stable and efficient during operation.
3)The imported trachea has high flexibility, winter frost resistance, no burst, frost resistance, fatigue resistant cable and more extended service life.
4) The frame plate, cold plate welding, after welding after annealing processing, the machine in the production process without affecting the internal stress and deformation.

Operation process:

Separating agent → Pre-milling → Infrared baking lamp1  EVA Glue  tank  → Vertical glue tank → Edge tape feeding  → Double rail end cutting→ Trimming 1 → Trimming 2 → Corner rounding  → Scraping 1Scraping 2 → Flat scraping → Cleaning agent → Polishing 

Product Paramenter
Edgeband Thickness
0.4-3mm
Edgeband Height
10-65mm
Edgeband Herght(Pre-milling runs)
12-36mm
Panel Thickness
8-60mm
Panel Thickness(Pre-milling runs)
8-32mm
Feeding Speed
16-23m/min
Min. Panel Width
≥60mm
Min.Panel Length
50mm
Min.Panel Length(Pre-milling runs)
100mm
Motor Power
14.13kw
Working Pressure
0.7Mpa
Overall Dimension(L*W*H)
7527*760*1600mm
Net Weight
3500kg
Details Images

Spray Unit

Isolate the glue on the surface of the panel in up and
bottom side

Pre-milling

Remove the possible waving texture on edge to achieve better edge banding affection
 

End cutting

High precision trimming with two hardened linear guide

Trimming

Fine trimming of the top and bottom edges. Complete with 2 high-frequency motors

Corner Rounding

Four heads corner rounding: high precision guaranteed perfect look and touch

Scraping

Scraping eliminates the imperfections resulting from previous machining operations on the top and bottom of the edge

Wire Fracture

Remove the wood silk,prevent winding to the polishing wheel to cause the motor to be jammed and burned out

Flat Scraping

Removes excess glue from the top and bottom of the panel

Clean Unit

Clear the residual glue ,keep panel clean

Pneumatic Polishing

The buffing device adopts cotton material polishing wheel to sand the finished edge band more smoothly

 














Q1. Are your trading company or factory? 

A1. We are factory with more than 20000m2 workshop located in Shunde Dist., Foshan, Guangdong, China.

Q2. What machine can you supply?

A2. Our main machines are computer beam saw, edge banding machine, cnc drilling machine, cnc router machine etc.widely used for panel furniture production.

Q3. What is the payment term?
A3. T/T 30% in advance and balance before shipment, LC or by negotiation.

Q4. What is the delivery time?

A4. Normal 380V voltage is 15-30 days, other voltage is 30-45days.

Q5. What is the guarantee?

A5. 12 months for the whole machine. Within 12 months under normal use and maintenance, if something is wrong with the machine, you will get spare part for free. Out of 12 months, you will get spare parts at cost price.You will also get technical support and service all the lifetime.

Q6. Can you support the pre-sales service before confirm the order?

A6. Yes ,you will get experienced pre-sales engineer to support, not only including machine and auxiliary selection but also electrical ,air, machine layout in factory ,etc.

Q7. What is the after sales services?

A7. you will be able to get free training advice towards our machine in our factory. You will also get free suggestion and consultation, technical support and service by online tools. We can also send our engineer to your factory, but need you take charge of all travelling cost and labour cost











Contact Us

    Name: Mark

    Mobile: +86-15800060872

    E-mail: [email protected]

    QQ: 107422097

    WeChat: +8615800060872

    Whatsapp: +8615800060872

    Add: Building 6, Tianyue Science and Technology Industrial Park, Leping Town, Sanshui District, Foshan City, Guangdong, China

    facebook: https://www.facebook.com/markleung3924 facebook: https://www.youtube.com/channel/UC168JX9KoWPoN9O8RDyYZfA QQ: 107422097 efindmachinery888@gmail.com
Top